1. [1] Singh. G. K., 2002, "Multi-Phase Induction Machine Drive Research—A Survey", ElectricPower Systems Research, vol. 61, no. 2, pp. 139–147. [
DOI:10.1016/S0378-7796(02)00007-X]
2. [2] خسروجردی. م. ج. ورضایی. ح.، 1391، "یک رویکرد فعال جهت طراحی سیستم کنترل تحمل پذیر خطا مبتنی بر مدل برای موتورهای القایی سه فاز"، مجله کنترل، سال 6، شماره 2 ، صفحه-ی 15-9.
3. [3] Abdi. E., McMahon. R. A., Tatlow. M. R., and Tavner. P. J., 2013, "Design and Performance Analysis of a 6 MW Medium-Speed Brushless DFIG", In 2nd IET Renewable Power Generation Conference, pp. 1-4. [
DOI:10.1049/cp.2013.1850]
4. [4] Roberts. P. C., 2005, "A Study of Brushless Doubly-Fed (Induction) Machines", PhD dissertation, University of Cambridge.
5. [5] Lipo T. A. and Mu-oz A. R., 2000, "Dual Stator Winding Induction Machine Drive", IEEE Trans. Ind. Appl., vol. 36, no. 5, pp. 1369–1379. [
DOI:10.1109/28.871286]
6. [6] Guerrero. J. M. and Ojo. O., 2009, "Total Airgap Flux Minimization in Dual Stator Winding Induction Machines", IEEE Trans. Power Electron., vol. 24, no. 3, pp. 787-795. [
DOI:10.1109/TPEL.2008.2012111]
7. [7] Ichikawa. M., Koga. K., Sonoda T., and Ueda. R., 1992, "Stability Analysis in Induction Motor Driven by V/f Controlled General Purpose Inverter", IEEE Transactions on Industry Applications, vol. 82,no. 2, pp. 472-481.
8. [8] Bojoi. R., Farina. F., Griva, G., and Profumo. F., 2005, "Direct Torque Control for Dual Three-phase Induction Motor Drives", IEEE Transactions on Industry Applications, vol. 41, no. 6, pp. 1627–1636. [
DOI:10.1109/TIA.2005.858281]
9. [9] Pienkowski. K., 2012, "Analysis and control of Dual Stator Winding Induction Motor", Archives of Electrical Engineering, vol. 61, no. 3, pp. 421-438. [
DOI:10.2478/v10171-012-0033-z]
10. [10] Basak. S.and Chakraborty. C., 2015, "Dual Stator Winding Induction Machine: Problems, Progress and Future Scope", IEEE Transactions on Industrial Electronics, vol. 62, no. 7, pp. 4641–4652. [
DOI:10.1109/TIE.2015.2409800]
11. [11] Ojo. O., Sastry. J., and Wu. Z., 2007, "High-Performance Control of a Dual Stator Winding DCPower Induction Generator", IEEE Transactions on Industry Applications, vol. 43, no. 2, pp. 582–592. [
DOI:10.1109/TIA.2006.890020]
12. [12] Ojo. O. and Wu. Z. 2007, "Speed control of a dual stator winding induction machine", In Proc. IEEE APEC, pp. 229–235. [
DOI:10.1109/APEX.2007.357519]
13. [13] Fredj. M. B., Khlifi. M. L., Rehaoulia. H., and Slimene. M. B., 2013, "Indirect Field-Oriented Control for Dual Stator Induction Motor Drive", Systems, Signals & Devices (SSD), 10th International Multi-Conference on.
14. [14] مویدی¬راد. ح.، فرشاد. م. و شمسی¬نژاد. م. ¬ع.، 1390، "ارائه شیوه¬ای جدید برای کنترل عصبی سرعت موتور القایی: مقاوم در قبال تغییرات مقاومت¬های استاتور و روتور و مناسب برای هر دو محدوده¬ی سرعت¬های خیلی کم و زیاد"، مجله¬ی مهندسی برق و کامپیوتر ایران، سال 9، شماره 2، صفحه¬ی 113- 107.
15. [15] مویدی¬راد. ح.، فرشاد. م. و شمسی¬نژاد. م. ¬ع.، 1390، "بهبود پروفایل سرعت در درایو کنترل سرعت موتور القایی با استفاده از ایده¬ای جدید در تولید پالس¬های کلیدزنی مبتنی بر شبکه¬های عصبی مصنوعی"، مجله¬ی سیستم¬های هوشمند در مهندسی برق، دانشگاه اصفهان، سال 2، شماره 4، صفحه¬ی 46- 35.
16. [16] مویدی¬راد. ح.، شمسی¬نژاد. م. ¬ع. و فرشاد. م.، 1391، "بهبود عملکرد درایو کنترل سرعت موتور القایی در محدوده¬ی سرعت-های پایین و بالا با جبران¬ساز شار روتور"، مجله¬ی انجمن مهندسین برق و الکترونيک ايران، سال 9، شماره 2 صفحه¬ی 64-59
17. [17] Holmes. D. G., McGrath. B. P., and Parker. S. G., 2012, "Current Regulation Strategies for Vector-Controlled Induction Motor Drives", IEEE Transactions on Industrial Electronics, vol. 59, no.10, pp. 3680–3689. [
DOI:10.1109/TIE.2011.2165455]
18. [18] Joshi. B. M., Chandorkar. M. C., 2014, "Vector Control of Two-motor Single-inverter Induction Machine Drives", Electric Power Components and Systems, vol. 42, no. 11, pp. 1158–1171. [
DOI:10.1080/15325008.2014.921949]
19. [19] D. B. Lawson and R. D. Lorenz, 1990, "A Simplified Approach to Continuous On-Line Tuning of Field Oriented Induction Motor Drives", IEEE Transactions On Industrial Applications, vol. 26, no. 3, pp. 420–424. [
DOI:10.1109/28.55972]
20. [20] M. P. Kazmierkowski, 1991, "A Novel Vector Control Scheme for Transistor PWM Inverter-Fed InductionMotor Drive", IEEE Transactions On Industrial Applications, vol. 38, no.1, pp. 41-47.
21. [21] Chang. L., Doraiswami. R., and Kojabadi. H. M., 2005, "A MRAS-BasedAdaptive Pseudoreduced-Order Flux Observer for Sensorless InductionMotor Drives," IEEE Transactions on Power Electronics, vol. 20, no.4, pp. 930-176. [
DOI:10.1109/TPEL.2005.850969]
22. [22] Dey. A., Chandra. D., Dwivedi. B., and Singh. B., 2009, "Vector Control of Three-Phase Induction Motor Using Artificial Intelligent Technique", ARPN Journal of Engineering and Applied Sciences, vol. 4, no. 4, pp. 57-67.
23. [23] Dujic. D., Jones. M., Levi. E., Vukosavic. S. N., and Wright. P., 2008, "Five-Leg Inverter PWM Technique for Reduced Switch Count Two-Motor Constant Power Applications", IET Electric Power Applications, vol. 2, no.5, pp.275-287. [
DOI:10.1049/iet-epa:20070497]
24. [24] Nozawa. Y., Matsuse. K., Oka. K., 2006, "An Improved Method of Voltage Utility Factor for PWM Control of a Five-Leg Inverter in Two Induction Motor Drives", IEEJ Transactions on Electrical and Electronic Engineering, vol. 1, no. 1, pp. 108-111. [
DOI:10.1002/tee.20024]
25. [25] Hew. W. P., Levi. E., Lim. C. S., Rahim. N. A., 2013, "Model Predictive Control of a Two-Motor Drive With Five-Leg-Inverter Supply", IEEE Transactions on Industrial Electronics, vol. 60, no. 1, pp. 54–65. [
DOI:10.1109/TIE.2012.2186770]
26. [26] Feng. S. and. Mei. Y, 2015, "An Optimized Modulation Method for a Five-Leg-Inverter for Dual Induction Motor Drives", IEEE 18th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), pp. 1524–1529.
27. [27] Dangeam. S. andV. Kinnares, 2014, "Five-Leg Voltage Source Inverter for Driving Two Single-Phase Induction Motors", Electrical Machines and Systems (ICEMS), 17th International Conference on, , pp. 156 – 161.
28. [28] Liu. C., Wu. B., Wang. J., Xu. D., and Zargari. N. R., 2009, "A Novel Three-Phase Three-Leg AC/AC Converter Using Nine IGBTs", IEEE Transactions on Power Electronics, vol. 24, no. 5, pp. 1151–1160. [
DOI:10.1109/TPEL.2008.2004038]
29. [29] Blaabjerg. F., Loh. P. C., and Qin. Z., 2015, "Application Criteria for Nine-Switch Power Conversion Systems with Improved Thermal Performance", IEEE Transactions on Power Electronics, vol. 30, no. 8, pp. 4608–4620. [
DOI:10.1109/TPEL.2014.2360629]
30. [30] Matsuse. K., and Oka. K., 2007, "A Nine-switch Inverter for Driving Two AC Motors Independently", IEEJ Transactions on Electrical and Electronic Engineering, vol. 2, no. 1, pp. 94-96. [
DOI:10.1002/tee.20102]
31. [31] Azizi. M., Beiranvand. R., and Mohamadian. M., 2016, "A New Family of Multi-Input Converters Based on Three Switches Leg", IEEE Transactions On Industrial Applications, vol. 63, no.11, pp. 6812 – 6822.
32. [32] Ojo. O. andWu. Z., 2008, "Modeling of a Dual-Stator-Winding Induction Machine Including the Effect of Main Flux Linkage Magnetic Saturation", IEEE Transactions on Industry Applications, vol. 44, no. 4, pp. 1099–1107. [
DOI:10.1109/TIA.2008.926058]
33. [33] Hu. J. and Wu. B., 1998, "New Integration Algorithms for Estimating Motor Flux over a Wide Speed Range", IEEE Transactions on Power Electronics, vol. 13, no. 5, pp.969-976. [
DOI:10.1109/63.712323]
34. [34] Bose. Bimal. K., Modern Power Electronics and AC Drives, Upper Saddle River, NJ: Prentice-Hall, 2002.
35. [35] Martin. J. P., Pierfederici. S., F. Meibody-Tabar, and Shamsi-Nejad. M. A., 2007, "Study of an Hybrid Current Controller Suitable for DC–DC or DC–AC Applications", IEEE Transactions on Power Electronics, vol. 22, no.6, pp. 2176 – 2186. [
DOI:10.1109/TPEL.2007.909186]
36. [36] ابجدی. ر.، جلال. س. م.، سلطانی. ج. وفاطمی. ر.، 1392، "کنترل مستقیم گشتاور و شار یک موتور شش فاز القایی نامتقارن، تغذیه شده با اینورترهای سه سطحی SVPWM با بکارگیری طبقه¬بندی عصبی"، مجله¬ی کنترل، صفحه¬ی 15-9، سال 7، شماره 3.
37. [37] Lipo. Thomas. A. and Novotny. D. W., "Vector Control and Dynamics of AC Drives", Oxford University Press, 1997.
38. [38] Khanniche. M. S., Igic. P., Towers. S. M., Mawby. P. A., and Zhou. Z., 2005, "Power Loss Calculation and Thermal Modelling for a Three Phase Inverter Drive System", Journal Electrical Systems, vol. 1, no.4, pp. 33-46.
39. [39] Ceballos. S., Jaen. C., Osorno. D., Pou. J., and Zaragoza. J., 2011, "Power Losses Calculation Methodology to Evaluate Inverter Efficiency in Electrical Vehicles", 7th International Conference-Workshop Compatibility and Power Electronics (CPE), pp. 404-408.